BSIF

The effectiveness of some types of PPE, notably RPE and protective clothing, will be significantly reduced if they are not kept clean. 🔵 Hi-vis jackets, trousers and coveralls must be cleaned regularly to ensure that retroreflective strips are easily identifiable

Hand arm vibration syndrome (HAVS) is serious and disabling, and nearly 2 million people in the UK are at risk It is a health hazard that can affect workers who use vibrating tools repeatedly 🔗 ow.ly/k1nJ50WNAwx 🔵 Take action now to protect yourself and your workforce

Young people at work need clear and sufficient instruction, training and supervision so that they understand the importance of safety and health and can work without putting themselves and other people at risk. 🔵 Young workers may need more supervision than older workers

It is a legal requirement that workers using tight-fitting RPE are fit tested by a competent person. Visit Fit2Fit to learn more 🔗 ow.ly/DQep30mu67b 🔵 This scheme is designed to confirm the competency of people performing the fit testing of RPE

When selecting and implementing the use of RPE, the employer must consult with employees either directly, indirectly through elected representatives, or via a safety representative appointed by a recognised trade union.

Employers: Are you fully aware of your responsibilities regarding the exposure of employees to substances hazardous to health? 🔗 ow.ly/TiS650ZYuCk 🔵 RPE should only be used after you have taken all other reasonably practicable measures to prevent or control exposure

Proper assessment of the risk of musculoskeletal problems in cleaning staff should take account of: 🔵 all cleaning tasks 🔵 individual worker capacity 🔵 loads involved 🔵 work environment 🔵 site-specific risks Employers: Are these risks fully assessed in your business?

The RPE you provide to your employees must fit them properly in order to work effectively. Find Fit2Fit-accredited fit testers here 🔗 ow.ly/lHoY50A8Mul 🔵 It is also a legal requirement that workers using tight fitting RPE are fit tested by a competent person

When selecting and implementing the use of RPE, the employer must consult employees either directly or through elected reps or via a safety representative appointed by a recognised trade union. 🔵 RPE should only be used where other measures cannot adequately control exposure

Our vision is one where suppliers work with employers, duty holders and safety professionals to enhance the standard of protection for the UK workforce. 🔗 ow.ly/6Q8W50VAUvz Help forge a direct link between suppliers and buyers under the same collaborative federation.

🔵 If your work is likely to involve asbestos, you and your employer must take action to make sure that you and others are not exposed to it There are serious risks to your health if asbestos is disturbed or damaged and harmful fibres are released into the air.

Employers: Always ensure that the correct respirators are provided to employees and that workers know how to use them, as many workers: 🔵 are not provided with correctly selected RPE 🔵 are not provided with correctly maintained RPE 🔵 do not wear their respirator properly

When incompatible chemicals mix they can ignite or explode, release toxic, flammable or corrosive gases, or corrode chemical containers causing them to leak. 🔵 As an employer you must ensure that your workers are aware that some chemicals are not compatible with each other

Fall protection equipment plays a crucial role in safeguarding workers from the risks associated with working at height. BS 8681 sets out clear guidelines for the industry. 🔗 ow.ly/RGny50WxrtU Check out our overview of BS 8681.

A fire may be made worse if an oxidising agent is involved. 🔵 Substances can break down liberating oxygen which can cause an increase in the rate of burning Always store oxidising agents away from reducing agents and from flammable and combustible materials.

Are you looking for RPE fit testing training? Approved training 🔗 ow.ly/ge9f50QeLKB 🔵 All training has been thoroughly checked to make sure it aligns with the methods of Fit2Fit and complies with best practice for respiratory protective equipment fit testing

Users of RPE require training. For disposable filtering facepieces, training is focused on the use of the RPE. For other types of RPE, training content should include regular testing, maintenance and cleaning. 🔵 For breathing apparatus, seek expert training from your supplier

Understanding the different types of RPE available, the level of protection offered, and the limitations of the equipment are important when selecting RPE. Advice for employers 🔗 ow.ly/nfQK50ZYme6 🔵 RPE needs to be selected correctly and used properly by the wearer

Young people at work may be eager to impress or please people they work with, so you must supervise them effectively and make sure that they understand any training and instruction. They may also be unaware of how to raise concerns, so include this is as part of their training.

The Fit2Fit RPE Fit Test Providers Accreditation Scheme is designed to confirm the competency of those performing RPE fit testing. 🔗 ow.ly/DQep30mu67b 🔵 It is a legal requirement that workers using tight-fitting RPE are fit tested by a competent person