If an IoT device sits in a warehouse for months, outdated firmware can brick it on day one of installation.
We solved this with Local OTA.
Blynk apps push the latest firmware locally during provisioning — fixing the device before it ever talks to the cloud.
👇 blynk.io/blog/from-factory-f…
4
248
Nordic's nRF9151 is now supported on Blynk over LTE-M.
Flash a binary. Provision over UART. Power-on to live dashboard in under 15 seconds.
Dashboards, mobile apps, OTA updates, fleet management — no frontend code needed.
blynk.io/blog/nordic-nrf9151…
2
271
Halfway through writing firmware, you realize you need a new datastream.
So you stop. Switch to the browser. Navigate the console. Add it. Switch back. Try to remember what you were doing.
The Blynk MCP server fixes this — manage your entire Blynk account from inside your IDE.
Here's how to set it up: blynk.io/blog/what-happens-w…
1
362
The real case for IoT in agriculture: the cost of not knowing is almost always higher than the cost of a sensor.
Frost, dry tanks, over-irrigation. None of these are technology problems. They're visibility problems.
We wrote about how farms are solving them: blynk.io/blog/iot-in-agricul…
1
260
"Which ESP32 should I use?" — is one of the most common questions we hear from teams building connected products.
And it's a fair one. ESP32 is now multiple variants, each with different tradeoffs on power, wireless protocols, and cost. Wrong choice = expensive lesson.
Full overview → blynk.io/blog/which-esp32-fo…
What's your go-to ESP32 variant and why?
When you build a product, you choose your MCU for the application.
Adding connectivity to existing device usually means: rewrite for a new module, or build a custom stack from scratch.
Blynk.NCP is the third option. ESP32 as a dedicated network chip over UART adds WiFi, BLE provisioning, OTA, and cloud. Your MCU keeps doing its job.
Full overview: blynk.io/blog/blynk-ncp-add-…
#blynk #iot #esp32 #embeddedsystems
1
3
354
Cell coverage: ~20% of Earth's land.
A water pump 200km from anything. Cattle stations in Australia. Cargo crossing the Pacific. That's the other 80%.
Since 2022, NB-IoT works over satellite — same modem, same SIM, same firmware. No separate stack.
Satellite costs 700-900x more per byte than cellular. But "no data" on a $50k pump costs more.
Full breakdown here: blynk.io/blog/satellite-iot-…
1
284
Blynk.Edgent is now a native ESP-IDF component.
BLE provisioning, OTA updates, network management & secure MQTT — one dependency, no framework changes.
Full overview: blynk.io/blog/blynk-edgent-n…
#espidf #esp32 #ota
1
372
20 minutes of IoT setup. Or one prompt.
We shipped a remote MCP server for Blynk.
Create device templates, provision hardware, read data, and control outputs directly from your editor.
Full overview: blynk.io/blog/blynk-mcp-serv…
#MCP #AIoT #NoCode
"Set up an energy monitoring dashboard."
That’s the prompt. Blynk’s new AI assistant builds the datastreams, widgets, and configuration in seconds.
Available now on all plans.
Full overview: blynk.io/blog/blynk-ai-assis…
#AI #AIoT #NoCode
1
272
🚀 10 Years of @blynk_app : From a @Kickstarter campaign → to a platform powering 5,000+ companies and 1 million developers worldwide.
We’re unveiling the new Blynk brand ↓
Then read the full story: 🔗 lnkd.in/eNbBTK_9
#iot #lowcode
1
3
395
blynk retweeted
[31-10-25] Blynk amplía su ecosistema IoT con soporte nativo para ESP-IDF #IoT #InternetDeLasCosas internetdelascosas.xyz/artic…
💡 Real market feedback > guesses.
Chris Davidson (Blue Ridge Heating & Air) launched a mold detection product in weeks — without heavy infra spend. It made all the difference.
⚡ Launch fast with no-code
⚡ Skip years of infra build
⚡ Get real feedback & iterate quickly
That’s what happens when you build with Blynk.
#IoT #ProductLaunch #NoCode #Innovation #Blynk
2
426
❝My advice to entrepreneurs: look for a cloud-based service from the beginning. You don’t want to do it on your own.❞ — Kevin Jameson, CEO @ PureAir Filtration
With Blynk, they went from maintaining their own servers and manual reporting to a fully managed cloud stack — with alerts, dashboards, and zero custom dev.
✅ Faster time to market
✅ Real-time monitoring
✅ Branded client experience
🔗 Read the full story bit.ly/4kPmVdF
1
349
𝗬𝗼𝘂 𝗮𝘀𝗸𝗲𝗱. 𝗪𝗲 𝗯𝘂𝗶𝗹𝘁 𝗶𝘁. You can now invite the same user to multiple organizations — no duplicate accounts needed.
Perfect for consultants, integrators, and teams managing multiple projects.
✅ One login, multiple orgs
✅ Seamless switching for end-users
✅ Permanent or time-limited access
✅ Fully admin-controlled
❔Will it make your processes smoother?
#BlynkIoT #EnterpriseIoT #ProductUpdate #IoTPlatform #UserManagement #TeamAccess
302



