PromeAI

promeai.pro/canvas/en/projec… 1. Add a new canvas on PromeAI 2. Create a skill. 3. Prompts: Create a reusable skill named “Architectural Light Skeleton FPV”. Input: one exterior building image. Let the user select duration and aspect ratio; otherwise use model defaults. Output: an empty-site Start Frame, a compatible elevated Final Frame, and one cinematic video preserving the uploaded design. Analyze the building’s massing, entrance, floors, structural rhythm, core/atrium, roof and materials. Infer a plausible internal skeleton for visualization, not engineering documentation. Divide any selected duration proportionally: 20% foundation ignition and entry; 27% interior ascent; 13% rapid bank; 25% tilted ascent and upper exit; 15% exterior reveal. Use one continuous camera path. Start extremely low. Champagne-gold energy races through the ground grid and rises through columns. Move forward and upward into the forming entrance before the full exterior appears. Inside, luminous columns, beams, floor edges, braces, bridges and the core form around and ahead of the camera. Clearly show an interior: overhead floors remain visible, columns surround both sides and the core/atrium anchors the view. Hide facade, skyline and full exterior. Continue climbing. At the rapid-bank stage, perform one smooth 75–90° clockwise FPV roll into a steep bank. This is not a 360° barrel roll. Keep the camera tilted and moving upward along a slight curve, creating strong parallax. Level gradually only near the upper exit. Exit through an upper opening without descending. Pull backward and slightly upward at the same height. Materialize the facade and reveal the complete building only in the final stage. Preserve the building’s identity, geometry and materials. Adapt a ground-level upload into an elevated three-quarter Final Frame consistent with the climb. No cuts, teleportation, rotating building, collapse or early exterior reveal. Generate all outputs automatically; ask only if the source is unusable. 反馈：The draft is mostly correct. Please make these focused revisions before saving: 1. Change the proportional timing to: - 20% foundation ignition and entry - 27% interior ascent - 13% rapid bank - 25% tilted interior ascent - 15% upper exit and exterior reveal The camera must remain fully inside for the first 85% of the video. It may cross outside only when the final 15% begins. Do not include “upper exit” in the preceding 25% stage. 2. Add this visual constraint: “All structural light remains thin, transparent champagne-gold architectural wireframe—never solid glowing walls, arches, cladding or opaque light surfaces.” 3. Replace “Pull backward and slightly upward at the same height” with: “After exiting, pull backward while gaining only slight altitude; never descend or return to ground level.” 4. Make the path adapt to the building typology: - Towers: climb around the vertical core and exit through an upper structural opening. - Cultural buildings: rise and bank through the central atrium, then exit through the roof structure or oculus. - Stadiums and pavilions: follow the internal roof span and exit through an upper perimeter opening. 5. Preserve the rapid signature movement: During the 13% bank stage, the camera must keep moving forward and upward while rolling 75–90°. Hold the tilted angle through the following interior-ascent stage and level gradually only immediately before the final exit. Keep all other sections unchanged.