Restronics (@Restronics1) header
Restronics (@Restronics1) profile picture

Fixer and builder of old things.

Joined December 2020
See how it magnet is offset!
11
195
The radio has an unusually large speaker for a transistor radio of the day, and it does really sound good.
2
16
296
It lives! Previous person to work on it looks like they cleaned out some corrosion, but then soldered a wire from the mixer coil to the tuning cap frame instead of the cap itself, which killed the oscillator transistor. I moved the wire, installed a spare germanium PNP.
1
12
243
I spent the last couple of days cleaning out the shop. I had a couple pieces of test equipment on the bench I was never using, so I put them away, and plugged in a couple variable regulated power supplies that I was using a lot. Got a 1961 Zenith Royal 500H on the bench first.
2
2
24
450
Simple issue on the Philco.. Not sure what those extra wires were for, maybe for testing. Poor radio has a lot of rust in it, but looks pristine from the outside. The po put a LOT of love and work into it.
1
5
204
My second model 70 Philco in a month. This one, I bet, has filter capacitor issues.
1
10
175
And it works, and is louder than my Atwater-Kent next to it. Not sure if the A-K is up to snuff though. Next step, get one of my battery radio going and see.
1
9
283
Here's a Stromberg-Carlson headset piece, with the diaphragm cut down, and soldered to the armature of the original mica diaphragm.
2
147
Fortunately I have some #40 wire, though I will have to take few layers off until I can get past the shelf-wear on the spool. It will be a challenge to do this without breaking the wire! (I think the original may be #42)
4
175