Choosing a Solar Panel for Battery Plus?
Battery Plus features two solar inputs and supports both single- and dual-panel setups.
Supported configurations:
- Single panel: 80W or 130W.
- Dual panels: 80W + 80W only.
Shop: bit.ly/4Bm1x9l
Docs: bit.ly/4zo2htz
#LoRaWAN #OffGridPower
✅Product Update: New 130W Solar Panel Kit for Battery Plus
Short daylight hours and cloudy weather can limit solar charging opportunities for remote LoRaWAN® gateways.
The 130W Solar Panel Kit option, alongside the existing 80W, offers more peak power for single-panel installations.
Choose your Solar Panel Kit:
- 80W: US$139
- 130W: US$175
Both are designed for Battery Plus. Battery Plus is sold separately.
Store: bit.ly/4zOs0uW
Docs: bit.ly/4zOQ6pg
#LoRaWAN #SolarPower
Looking for a portable @TheMeshtastic node?
Bring WisMesh Pod on hikes, bike rides, or group outings. Use it to send messages and share your location through a compatible mesh.
Built-in 1000mAh battery and antennas. Ready to pair.
Explore WisMesh Pod: bit.ly/3Upw0mq
#Meshtastic
Product Launch: WisMesh Pod | RAK10708
Need a portable Meshtastic node without sourcing separate GNSS, antennas, or battery?
WisMesh Pod comes pre-flashed and ready to pair with the @TheMeshtastic app for off-grid messaging and location sharing.
Price: US$39
#Meshtastic #WisMesh
One hardware version supports 860–930 MHz.
Check regional compatibility before ordering.
Included: silicone case, wrist strap, USB-C cable, and Quick Start Card.
Shop: bit.ly/47iYaT5
Docs: bit.ly/47iYjpB
RAKwireless Store retweeted
High power @TheMeshtastic nodes are possible when you build with @rakwireless - WisMesh High Power Booster Kit with RAK13302 is here!
rok.land/high-power-booster
RAKwireless Store retweeted
How does the @RAKwireless WisMesh Repeater Mini V2 perform in the real world?
☀️ Solar powered
🔋 3200 mAh battery
🌧️ IP67 enclosure
🎥 Watch the full test:
youtube.com/watch?v=UNWAcrtH…
#LoRa #WisMesh #RAKwireless #Meshtastic
RAKwireless Store retweeted
Are you building @RAKwireless nodes? Check out WisMAP, which allows you to check for conflicts on slots and pins BEFORE you buy.
@TheRAKStore
wismap.rakwireless.com/
#meshcore #meshtastic #meshnetwork #LoRa #aprs
Building audio into an IoT device? Start with the signal path:
- Capture → RAK10711: Microphone + DSP
- Play Audio → RAK10712: Amplifier + speaker
- Capture + Process + Play → RAK10713: Microphone + DSP + amplifier + speaker
Explore these kits: bit.ly/4h9wy8J
WisBlock Audio tutorials: bit.ly/3VtRZst
#WisBlock #EmbeddedAudio #IoT
Product Update: RAK3312 Now Available in Three WisBlock Audio Kits
RAK3312 now replaces the previous RAK11200 Core option for new builds. RAK4631 configurations remain available.
- WisBlock Microphone Starter Kit | RAK10711: microphone + DSP
- WisBlock Audio Speaker Starter Kit | RAK10712: playback + amplifier + speaker
- WisBlock Voice Processing Starter Kit | RAK10713: microphone + DSP + amplifier+ speaker
#WisBlock #ESP32S3
Store pages:
- RAK10711: bit.ly/3TUaUwh
- RAK10712: bit.ly/3VI9Z2t
- RAK10713: bit.ly/46TqsDr
RAK3312 docs: bit.ly/4rq81zJ
RAK11200 docs: bit.ly/46E8K6M
Can WisNode Tag work with a third-party LoRaWAN® Network Server?
Yes. It can be configured for third-party network servers such as TTN and ChirpStack.
In third-party network servers mode, TrackIT® is used for device configuration, while location and uplink data are handled by your external backend.
For the integrated TrackIT tracking experience, use a supported WisGate gateway.
Docs: bit.ly/476Idz4
Shop: bit.ly/4rsHMbN
#LoRaWAN #IndustrialIoT #AssetTracking
Product Launch: WisNode Tag
Tracking workers or equipment across large sites becomes difficult when visibility depends on manual check-ins.
WisNode Tag combines GNSS, motion detection, SOS functionality, Bluetooth setup, and LoRaWAN® connectivity in a compact rechargeable tracker.
Starting at US$39.
Shop: bit.ly/4hj4WNj
#LoRaWAN #AssetTracking
Choose the regional variant for your deployment:
EU868 / US915 / IN865 / AU915 / KR920 / AS923
Works with WisGate gateways and compatible third-party LoRaWAN® networks and platforms.
Configure locally over Bluetooth with the TrackIT® app.
Docs: bit.ly/47bjt8N
#IndustrialIoT #RemoteMonitoring
Before adding more TX power, check repeater placement.
For WisMesh Repeater Mini V2:
- Mount above nearby obstacles
- Keep the antenna vertical
- Give the solar panel consistent daylight
- Avoid large metal structures
Then choose 22 dBm or 30 dBm/1W based on the link requirements and applicable local regulations.
Shop: bit.ly/3RXnBph
#Meshtastic #LoRa
Product Launch: WisMesh Repeater Mini V2 | RAK10728/RAK10729
Distance, terrain, and obstacles can leave gaps in a Meshtastic network.
WisMesh Repeater Mini V2 adds Standard 22 dBm and High Power 30 dBm/1W options, a dedicated waterproof USB Type-C connector, and upgraded battery mounting to our compact solar-powered outdoor repeater.
Starting at US$89.90
Shop: bit.ly/4xLaO8G
#Meshtastic #LoRa
Choose your configuration:
- 22 dBm or 30 dBm/1W
- With or without GPS
- 800 MHz or 900 MHz regional options
Use the high-power version only where regional regulations permit.
Docs: bit.ly/4wx8twS
#MeshNetwork #OffGridCommunication
Module or starter kit?
Choose RAK13302 if you want a modular 1W LoRa® radio for a custom WisBlock build.
Choose RAK10724 if you want a faster Meshtastic-ready starting point with the base, core, radio, antennas, and cables already selected.
Both are available in Battery Powered and External 5V Powered versions.
Shop:
- RAK13302: bit.ly/4q13rah
- RAK10724: bit.ly/3S02Gl8
Docs:
- RAK13302: bit.ly/4fIsQ59
- RAK10724: bit.ly/4pZB6B8
#Meshtastic #LoRa #WisBlock
One edge platform, multiple deployment roles.
RAK7392 can serve as:
- VPN router or firewall appliance
- LoRaWAN® gateway host
- Industrial protocol gateway
- Building automation edge gateway
- Local edge analytics platform
Docs: bit.ly/3RRU680
Shop: bit.ly/4wM78mS
#IndustrialIoT #EdgeComputing
































