TrainByTweet_VO (@TrainByTweet_VO) profile picture

Engineering a Network to Carry VoIP, training course presented here as a continuous series of tweets. @TrainByTweet Training_SaaS:http://t.co/ZwtqDNnb20

Training via Tweet
Joined August 2012
VOIP: Estimating Voice Bandwidth Requirements on WAN: Each channel will require 10,560 bits per second
VOIP: Estimating Voice Bandwidth Requirements on WAN: We will refer to these as call channels when we use the erlang charts
VOIP: ... simultaneous calls can the link support?
VOIP: Estimating Voice Bandwidth Requirements on WAN: If you have two campuses connected with a 256-Kbps line, how many ...
VOIP: Estimating Voice Bandwidth Requirements on WAN: Obviously, deleting silence is worth considering
VOIP: Estimating Voice Bandwidth Requirements on WAN: 40% of 26,400 bits per second equals 10,560 bits per second
VOIP: Estimating Voice Bandwidth Requirements on WAN: Assume activity rate equals 40%
VOIP: Estimating Voice Bandwidth Requirements on WAN: Calculate bit rate if voice-activity detection is used
VOIP: Estimating Voice Bandwidth Requirements on WAN: Assume G.729 codec (used in previous example)
VOIP: Estimating Bandwidth Required for One Call: If voice activity detection (silence suppression) is not used
VOIP: Estimating Bandwidth Required for One Call: Call is full duplex, so two streams are required
VOIP: Estimating Bandwidth Required for One Call: 3,300 bytes per second equals 26,400 bits per second
VOIP: Estimating Bandwidth Required for One Call: 50 packets per second means 50 66 equals 3,300 bytes per second
VOIP: Estimating Bandwidth Required for One Call: Total of 66 bytes per packet
VOIP: Estimating Bandwidth Required for One Call: Each packet contains 20 bytes of audio and 46 bytes of headers
VOIP: Estimating Bandwidth Required for One Call: Packet size measured in bytes, line speed measured in bits per second
VOIP: Estimating Bandwidth Required for One Call: Frame relay adds 6 bytes
VOIP: Estimating Bandwidth Required for One Call: RTP header equals 12 bytes
VOIP: Estimating Bandwidth Required for One Call: UDP header equals 8 bytes