William Arvidsson retweeted
We’ve raised $3.2M and spent 18 months building Scape.
Scape is the first email inbox that works for you:
If a product is stored digitally as a 3D-file, then you send this 3D-file to a location near the customer where it gets 3D-printed.
Does that mean the product has teleported? 🤔
1
37
Noticed people outside Sweden could not visit our website makex.se
Should be fixed now, although content is still in Swedish
43
At Makex we built a ball screw driven 3D-printer.
Stepper motors spin to slowly, so upgrading to servo motors is a must.
We have a 400 Watt AC-Servo about to be installed, very excited.
46
This is one of those product you think is already popular, but most people have not heard about...
34
Makex has built a high-temp 3D printer that automatically removes finished print jobs and start the next print in queue.
It’s a queue based system and it’s awesome to use.
42
There needs to be a slicer built for 3D printing, which takes a STEP file and slices it using true arcs. Circles and arcs should not contain ANY straight lines!
Modern slicer accepts STEP files but turns them into low poly STL files... so the benefit is lost.
1
53
I've become a believer in dual extrusion for 3D printers.
After theory crafting about how to solve ugly support areas.
I considered:
- Lower temps
- Non-planar
- Sharpie
- Different interface material
I believe a different support interface material makes the most sense.
1
58
Rounded top surfaces look bad with the current 3D printing technology because of the staircase effect.
There are two possible solutions:
1. Non-planar printing / Non-planar ironing.
2. Smaller layer heights.
Which do you think is the correct path forward?
28
3D printers must move away from passively heated chambers, and move to higher temps.
At low chamber temps you are stuck with materials, that cannot withstand real life use.
At +80 °C you can print with materials that customers want, and are commonly used.
Crank those temps up!
25
I've watched tons of videos about 3D printing, and it's mind-boggling to see how many people ignore quality issues and focus on speed instead.
In CNC machining, quality and accuracy is the first thing the builder checks. We should do the same.
First quality, then speed!
54
Do not underestimate how important a stiff frame is for your 3D printer.
When you build a house, you start with a solid foundation.
28
3D printing is going to make a similar journey to the one the semiconductor industry has made.
We will see a drastic increase in yield rate, quality, speed, automation, and materials. Machines will get more expensive as the focus shifts towards ROI and high thoughput density.
37








