LanmiLab (@lanmiLab) profile picture

Engineer, Researcher, Maker.

Joined December 2018
Rpi4 overloading, PiJuice helps with 12000mAh. #raspberrypi #pijuice #embedded
LoRa is everywhere.
Wanted to be DIY friendly, however there are two parts in smd SOIC package. Open Source @kicad_pcb Design 👉github.com/microhelios/H-BRI… #opensource #hardware #PCB #IoT #DIY
4
2
You will struggle to find power supply for this 👉🛠️🪛👓 @Hacksterio https://teapaw.org/t.co/UiFJ4PGC7o
Status: That diode was there minute ago, where is it now? 🤖🕸️🪛#prototype #testing #H_Bridge #circuit #PCB
Yes it requires soldering 🛠️☕️ @Hacksterio 👉 https://teapaw.org/t.co/VfiTEfZGnZ
Do not ask me where "C8" will fit 🍕⚙️📏🆘➡️⬅️⬆️⬇️ #pcb_design #kicad
1
2
Make Instructions @Hacksterio ⚙️🛠️👉https://teapaw.org/t.co/lJyQiXjpOd
1
Just collected parts from @Farnell_Avnet and PCBs from @PCBWayOfficial and the fun part begins. #making #prototype #PCB
1
Advantage of differential modulation, no DC offset and no odd harmonics, simplified filtering. #analog #circuit #simulation
Size: 100 x 50 mm, Arduino Nano compatible headers for MCU Add-On or PWM controller/modulator, power input up to 50V. #Hbridge #Class_D #Audio #PowerAmplifier #Arduino #MotorDriver
Got this $8.85, 12W LED Bulb from ebay with ability to be disassembled. 24 x 0.5W white LEDs mounted on aluminum substrate.. Thinking how to customize, maybe fitting Arduino or Raspi inside that big globe.. #ledbulb
1
2
Reverse engineered schematic. Constant current driver around 0.3 amps through two parallel series of 12 LEDs. Current is set via sensor resistor and that could be way to make it dimmable.. #leddriver #circuit
Rpi 4B setup with Rpi Camera plus UPS HAT @ThePiJuice. #raspberrypi4 #upspower
1
3
6
Testing this. HC-SR501 Motion sensor can wake-up battery powered @Raspberry_Pi in off-grid application and when moving object appears it can start recording. #RaspberryPi #motiondetection #surveillancecamera #thepijuice
1