Pinned Tweet
How to Properly Use Frame Generation for GTA 6 — From the Veyra Developer
Hey everyone! I'm the developer of Veyra.
Ever since it was confirmed that GTA 6 would run at only 30 FPS, my community has been growing incredibly fast.
Many players have discovered Veyra through different platforms and started using it. First of all, I'd like to thank everyone for your support and appreciation!
We currently have over 2,000 players in our community, and Veyra has also started gaining quite a bit of attention overseas.
So there's no need to worry too much about the software's usability or overall experience.
We've pushed capture card latency optimization almost to its absolute limits.
If you've previously tried using OBS or PotPlayer for capture and found the latency too high, I strongly recommend giving Veyra another try.
I think you'll notice a completely different experience.
How to Get the Smoothest Frame Generation Experience with 30 FPS Games
I'd like to share some tips on how to properly use frame generation with 30 FPS games while minimizing latency as much as possible.
First, even when playing a game running at 30 FPS, I still recommend setting your capture card to 60 FPS.
Why?
Because capturing at 60 FPS can actually provide lower display latency than capturing directly at 30 FPS.
The reason is illustrated in the image below.
As you can see, capturing at 60 FPS can reduce latency by more than half compared to capturing at 30 FPS.
However, when capturing a 30 FPS game at 60 FPS, half of the captured frames will inevitably be duplicates.
For example:
Original 30 FPS frames: ABCDEFG
Captured at 60 FPS: AABBCCDDEEFFGG
If you apply frame generation directly to these duplicated frames, the algorithm will try to interpolate between identical frames, resulting in poor frame generation quality.
Here's how to fix it:
Go to the Frame Generation section in Veyra and enable "Remove Duplicate Frames" or "60→30".
This converts the 60 FPS capture stream back into 30 unique frames.
As shown in the middle image above, you'll still maintain approximately the same low capture latency as 60 FPS capture.
At the same time, frame generation will no longer waste its work on duplicate frames, resulting in significantly better smoothness and visual quality.
🎮 Choosing the Right Frame Generation Model
For games running at 30 FPS, I strongly recommend using VFG instead of DLSS or XeSS frame generation.
The reason is simple: at such a low base frame rate, DLSS and XeSS struggle to avoid ghosting and jelly-like distortion.
With VFG in High Quality mode, you can achieve an image with almost no noticeable ghosting or warping artifacts.
If your GPU is powerful enough, the smoothness is genuinely incredible.
However, there's a catch: VFG High Quality is extremely GPU-intensive.
In my testing with an RTX 5070, generating a single frame at 4K using VFG High Quality takes approximately 20 ms.
This makes it mainly suitable for games running at 30 FPS.
But when it works, the result is unbelievably smooth. Seriously, smooth as silk.
What about Medium Quality?
VFG Medium Quality still produces significantly better results than DLSS or XeSS in low-FPS scenarios.
More importantly, its performance overhead is approximately 3–4 times lower than High Quality mode.
I highly recommend experimenting with both modes to find the best balance for your GPU.
🔍 Choosing the Right Super Resolution Model
I've noticed that many users still prefer DLSS SR.
However, because Veyra doesn't have access to the game's internal rendering pipeline, DLSS SR cannot deliver its full potential in our application.
The actual improvement is fairly limited.
Instead, I recommend using RTX Video Super Resolution.
Set the quality to Medium.
It provides a noticeable improvement in image quality without consuming too much GPU performance.
⚡ About Capture Card Latency
Let's talk about capture card latency.
Currently, most capture cards on the market use either 5 Gbps or 10 Gbps USB interfaces.
Across different brands, latency differences between capture cards using the same chipsets are generally quite small.
The main advantage of 10 Gbps capture cards is support for higher-bandwidth formats, including:
4K 60 FPS NV12
1440p 60 FPS HDR
4K 30 FPS HDR
Here are some approximate latency measurements:
Capture FormatLatency1440p 60 FPS NV1210–20 ms4K 60 FPS NV1230–40 ms4K 30 FPS P010 (HDR)80–100 ms
So, if you're extremely sensitive to latency, you can actually capture at 1440p 60 FPS NV12 and then use super resolution to upscale the image.
This gives you a much lower-latency gaming experience.
Although, to be fair, most people aren't nearly as sensitive to latency as they think they are.
Not everyone is an esports professional, even if they think they are. 😂
If you absolutely want native 4K resolution and native HDR, there's not much you can do.
Just get a PCIe capture card.
But if you're happy with RTX HDR, you can save yourself some money.
Simply enable RTX HDR inside Veyra.
The results actually look pretty damn good.
🛒 Recommended Capture Cards
5 Gbps Capture Cards
Supported formats:
1440p 60 FPS NV12
4K 30 FPS NV12
These are my first choice for 1440p users who don't need HDR. They're also suitable for 4K users who can tolerate slightly higher latency.
Recommended models:
MICHENSEN T800 / T900
KUHAIMI 27P / 26P
ACASIS 007 Pro / 009 Pro
AVerMedia GC553 Pro / GC551G2
Elgato HD60 X
10 Gbps Capture Cards
Supported formats:
1440p 60 FPS HDR
4K 30 FPS HDR
4K 60 FPS NV12
Recommended models:
MICHENSEN T911
KUHAIMI G50
AVerMedia GC553G2
Elgato 4K X
PCIe Capture Cards
Supported format:
4K 60 FPS HDR
Recommended models:
AVerMedia GC573
Elgato 4K Pro
For capture cards with the same specifications, feel free to choose whichever brand you prefer.
Based on my testing, latency differences between comparable models are generally within 5 ms.
There's no need to spend a fortune just for a different brand name.
That's all for now. Enjoy your games, everyone! 🎮
就是这样!感谢大家喜欢 veyra❤️
i ran GTA VI on my PC through an RTX 5080, look at this picture, it's f*cking incredible
on every PS5, even the Pro, the game is locked to 30 fps. on my PC the same frames run at 60 with DLSS 5 lighting, that's the bottom half of the video
here's what i measured and how to set it up on yours in 5 minutes:
what the test showed:
• in 80 seconds of gameplay the console put out 2,351 real frames, my PC put out 4,700
• DLSS 5 takes 4.1 ms per frame, frame generation 1.5 ms, the GPU sits at 39%
• 60 fps holds in real time, 56 in the worst 1%
• half the frames in a PS5 stream are copies: the game renders 30, the console sends 60
and it's not just me:
- Rockstar locks GTA VI to 30 fps on every console, PS5 Pro included (Digital Foundry)
- Veyra, the app all of this runs on, has 112,000+ downloads (GitHub)
can you put DLSS 5 on the PS5 itself? no. the PS5 has an AMD GPU with no NVIDIA cores, and a jailbroken console won't run GTA VI, it needs the latest firmware. but the PS5 can stream to a PC, so no $200 capture card needed
how to set it up on yours:
1. paste the prompt from the first comment into Claude Code or Codex, the agent checks your GPU, installs Veyra from my repo and sets the GTA VI preset
2. on the PS5 turn on Remote Play: Settings > System > Remote Play
3. same menu, hit Link Device and type the 8 digits into Veyra
4. in Veyra set PS5 streaming to 1080p, 60 fps, H.265
5. in Pro mode turn on NR "RTX 50 · NVIDIA original" with 2 layers and Frame Gen DLSS 2X, 4X on a 120 Hz screen
6. go fullscreen and hold V to see what the console alone looks like
works on RTX 40 and 50, DLSS 5 needs an RTX 50. controls still react at 30 fps, the picture is what gets smoother
do it before your unlock tonight. prompt and repo in the first comment
how people are cashing in on this launch is in the article below
4
4
1,674
Looks like GTA 6 has some pretty noticeable frame drops on the standard PS5, but that's not a problem with Veyra.
Just check out any Chinese GTA 6 livestream and you'll see how smooth it looks thanks to Veyra.
Think I'm making this up? Here's the livestream link. See for yourself.
This is how people who used to say 30 FPS games couldn't be frame-generated react when they finally try Veyra.
I told you guys, Veyra is different.
This is hands down the best software for playing GTA 6.
120 FPS GTA 6, HERE WE GO! 🔥
If you think I'm making this up, here's a link to the livestream. Go see for yourself. live.bilibili.com/719260?liv…
2
3,195
A social media influencer with 200,000 followers is using Veyra and planning to use it for playing GTA 6 at 120 frames per second.
Likely7 retweeted
GTA VI 60 FPS Guide (Veyra)
reddit.com/r/losslessscaling…
In China, there are already tens of thousands of streamers on TikTok who are preparing to go live with GTA 6. They are eager to be among the first to play the game as soon as it's released in New Zealand, and almost everyone is using Veyra to ensure a better experience for both themselves and their viewers.
The level of acceptance of lag varies from person to person. If you're a professional esports player like Faker, you can also utilize the virtual camera feature added in version 2.1.9 to provide viewers with a better experience.
This is a real-world latency test from the Veyra community. If you've previously used OBS or PotPlayer to capture gameplay on PS5 and used "Little Duck" for frame interpolation, I strongly recommend removing "Little Duck" and using Veyra directly. You will experience significantly lower latency and much better frame interpolation performance. Specifically, when playing GTA 6, I can confirm that Veyra provides a smooth, ghost-free experience at 30 frames per second.
Replying to @likely2002
I just tested the latency with my set up:
RTX 4080S & Elgato 4K pro capture cards
compare when the muzzle flash appears
However, for games rendered at 30fps on PS5, the expected engine rendering latency is approximately 50 ms to 70 ms. Need to consider that as well.
If you use Bilibili, you'll find that almost everyone planning to play GTA 6 is discussing the Veyra, and numerous Chinese TikTok influencers with millions of followers are using it and planning to stream GTA 6 using Veyra. Therefore, you should try it out immediately and avoid the 30fps experience in favor of 120FPS.
Oh, and one more thing! 💜
Veyra now has a community-created token on Pump.fun!
If you’re into crypto, trading it generates creator fees that I can receive to help support Veyra’s continued development.
It’s honestly crazy to see the community supporting this open-source project in such a unique way.
Thank you all! ❤️
This token is community-created, not an official Veyra release or investment recommendation. Crypto trading involves risk.























