Nikhil Chavda (@nikisinfact) header
Nikhil Chavda (@nikisinfact) profile picture

Solving problems I wish someone had solved for me. @epichydraulic Support for Hydraulic: https://teapaw.org/t.co/dW9qaMyX9l Side Project: @getsavebase

Joined September 2023
Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)Photo by Nikhil Chavda (@nikisinfact)
🚜 Komatsu Mini Excavator Hydraulic Mystery (Deep Dive) OP bought a Komatsu PC27R-8 mini ex off marketplace. Looked clean, started fine… but hydraulics were a mess. Here’s the full story, what was wrong, and how to fix a similar nightmare 👇 1. The Symptoms – Engine starts and runs, but hydraulics are super weak – All functions move, but very slowly – Travel motors won’t move the machine on the ground – New hydraulic pump installed by previous owner, “worked for 1 hour,” then the machine quit moving and sat for 2 years With a gauge on the main pump outlet, pressure was only ~2000 psi vs >5000 psi spec. Fluid heated up fast, pump stayed cool, and there was a constant whooshing/bypassing sound at the main control valve.
5
3
17
1,503
Their BIGGEST excavator yet | JCB 520X
77
Nikhil Chavda retweeted
Moving a massive 80-ton Liebherr 974 excavator by Fasoulas Heavy Transports maneuvers. Watch as the powerful MAN TGX 41.680 heavy-duty truck and a Goldhofer hydraulic trailer team up to transport the massive Liebherr 974 excavator across an 80 km route 🔥📸 – at Mérida, Yucatán
42
250
19
3,243
368,345
If you look closely, those could very well be tiny hydraulic hoses instead of tendons!
Closer look at the image of Optimus hand from the new Tesla video.
1
39
Stubborn gland nut on 30T excavator cylinder, spanner wrench recommendations? OP is working on a 30T excavator bucket cylinder and it's gland nut is locked up tight. He put a 4 foot cheater pipe on adjustable spanner and ended up snapping the pin right off. Now he's looking at ordering the 30T excavator heavy gland nut wrench from fab heavy parts. Has anyone used their heavy spanners on big CAT or Komatsu cylinders? Does the pin drive hold up against high breaker bar leverage without slipping?
22
Nikhil Chavda retweeted
Looking for a wax injection die maker that can comfortably build a fully automated tool with 3 to 4 hydraulic actions. Part is roughly 8" long, for steel investment castings. US-based preferred, DMs open.
1
1
1
70
Nikhil Chavda retweeted
Hauling rough soil off-site just to filter out rocks and roots wastes fuel and time. Hydraulic rotary screening buckets let excavators sift clean topsoil right where they dig. tinyurl.com/mr3twvdx #Engineering #HeavyMachinery #Hardware
1
1
69
Got some great SEO advice on my last post about Savebase's 80K impressions and 0.6% CTR. The biggest takeaway? Average CTR alone doesn't tell the whole story. Next, I'm breaking down Google Search Console data by: • Queries ranking 1–3, 4–10, 11–20, and 21+ • Branded vs non-branded searches • High-impression pages with low CTR • Pages closest to breaking into the top 3 I'll share what I find. Curious to see where the biggest opportunities are. 👀
SEO folks, what would you focus on next? 👀 Over the last 3 months, my side project (@getsavebase) has grown to: 📈 80.3K Google impressions 🖱️ 491 clicks 📊 0.6% CTR 🎯 13.5 average position The growth is encouraging, but I feel there's a lot of untapped potential, especially with that CTR. If this were your website, what would you prioritize next? Would love some honest feedback from SEO pros.
1
47
I’m convinced we only invented the smartphone so we wouldn't have to stare at the bathroom wall
24
Caterpillar 992G Wheel Loader Loading Caterpillar Dumpers
121
SEO folks, what would you focus on next? 👀 Over the last 3 months, my side project (@getsavebase) has grown to: 📈 80.3K Google impressions 🖱️ 491 clicks 📊 0.6% CTR 🎯 13.5 average position The growth is encouraging, but I feel there's a lot of untapped potential, especially with that CTR. If this were your website, what would you prioritize next? Would love some honest feedback from SEO pros.
7
2
5
219
John Deere 35G Excavator with 4 Way Hydraulic Angle Blade & Thumb, Low Hours SN-2147 Sale Price Only: $34,500 !!!
1
1
19
Nikhil Chavda retweeted
Out-of-Sync Hydraulic Cylinders? It's the Tee, Not the CylinderOne cylinder lifts first, the other lags. The cylinders are fine - it is the tee. Swap it for a synchronizing valve and they move together.#######
1
1
32
For anyone wondering what a medium size tanker steering gear looks like. Here is an example of a hydraulic ram style seen on many tankers, possibly even the Asphalt Atlantic
4
6
1
52
15,786
Nikhil Chavda retweeted
Replace the hydraulic breaker diaphragm seal (piston cup) and charge the accumulator with nitrogen gas.#hydraulicbreaker #hydraulichammer #eddie #montabert #rammer #epiroc #atlascopco
1
1
38
Caterpillar D6T Ripping
72
Heavy duty cylinder tear down, is a full gland nut and seal install tool set worth it?
1
1
64
Nikhil Chavda retweeted
Scotland’s iconic Falkirk Wheel in action. Opened in 2002, it’s the world’s only fully rotating boat lift and reconnects the Forth & Clyde Canal with the Union Canal. Perfectly balanced thanks to Archimedes’ principle, it lifts boats with remarkably little energy. #FalkirkWheel #CivilEngineering #Scotland
20
53
106
13,714
Nikhil Chavda retweeted
The video showcases the Hongqi H9’s 24-channel road simulation durability test, demonstrating vehicle quality to boost consumer confidence. Using 24 hydraulic actuators in a lab, the test replicates global rough roads and extreme driving scenarios, applying multi-dimensional loads across the entire vehicle. This rapidly exposes potential defects, compressing years of real-world aging and fatigue into a short timeframe.
7
38
7
254
54,368
Endless slides and bullet points won’t get the industrial system-learner where they need to go. Lunchbox Sessions takes you deep inside. buff.ly/OzmQRi7 #hydraulics #electrical #engineering
1
2
26
Nikhil Chavda retweeted
Demonstrations of the latest developments in #automation and #motioncontrol to help improve productivity for #packaging and processing applications could be found throughout @packexposhow 2026. Read more about these demos here: bit.ly/4BFpyIV. #fluidpower #PACKEXPO2026
2
3
57