Gus (@guferraz_) header
Gus (@guferraz_) profile picture

Gus

@guferraz_

Dr Gustavo F Trindade

 London, England
mvatools.com
Joined May 2009
  • Tweets1.8K
  • Following313
  • Followers187
205Media
Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)Photo by Gus (@guferraz_)
I tried to use a simple genetic algorithm to have an insight of what to do during a pandemic. Guess the result? MathWorks #matlab #programming #covid19 #epidemics #pandemic #algorithm #coronavirus #simulation #visualisation lnkd.in/geZJfuR

LinkedIn

This link will take you to a page that’s not on LinkedIn

lnkd.in
1
4
7
.@guferraz_ @npl @samsungresearch report a high-resolution #diagnostic method to obtain molecular information with 7-nm depth resolution and analyse organic light-emitting #devices at different #degradation levels #OLEDs #GettingApplied nature.com/articles/s41467-0…
1
3
4,533
Thanks for the opportunity @PGImetrology! #PGIDiscovery
PGImetrology (@PGImetrology) profile picturePGImetrology@PGImetrology31 Oct 2022
Excellent talk by @guferraz_ Great start to a day of Research, Career and Social engagement for measurement experts #PGIDiscovery.
Image from PGImetrology (@PGImetrology)
1
1
Listen to GVSTAVO - Angst by GVSTAVO on #SoundCloud soundcloud.app.goo.gl/FdQYK
Image from GVSTAVO (@GVSTAVO16)
1
1
News article by @RoyceInstitute about the @UKSAF1 Summer meeting held in Manchester earlier this month: royce.ac.uk/news/uksaf-summe…
Image from UKSAF (@UKSAF1)
3
1
6
Gus retweeted
NPL (@NPL) profile picture
NPL@NPL25 Jul 2022
Congratulations to Gustavo F. Trindade who has been awarded the Vickerman Prize by the UK Surface Analysis Forum (UKSAF) in relation to his work in the National Centre of Excellence in Mass Spectrometry Imaging and OrbiSIMS metrology. npl.co.uk/news/uk-surface-an…
Image from NPL (@NPL)
2
2
Some more highlights from day 1, see you all in the morning!
Image from UKSAF (@UKSAF1)
Image from UKSAF (@UKSAF1)
Image from UKSAF (@UKSAF1)
Image from UKSAF (@UKSAF1)
2
7
Thank you so much @UKSAF1 for the award and kind words in the nomination! Such an honour to receive this 😊
UKSAF (@UKSAF1) profile pictureUKSAF@UKSAF113 Jul 2022
Surprise @guferraz_! Congratulations on being the 2022 recipient of the Vickerman Award!
Image from UKSAF (@UKSAF1)
Image from UKSAF (@UKSAF1)
Image from UKSAF (@UKSAF1)
Image from UKSAF (@UKSAF1)
1
8
Valuable discussions taking place at our Biofilm Regulations and Standards Workshop today with @BiofilmFirst - a starting point of NBIC’s journey to support the #biofilm community in developing, improving and progressing the availability and use of biofilm standards. #biofilms
Image from National Biofilms Innovation Centre (NBIC) (@ukbiofilms)
1
5
16
Excellent piece of work! Happy to have contributed and pleased to see cryogenic #OrbiSIMS featured in #PNAS
Uni of Nottingham Press Office (@UoNPressOffice) profile pictureUni of Nottingham Press Office@UoNPressOffice18 Mar 2022
Scientists from @UoN_Pharmacy have accurately analysed the tough barrier layer of #skin giving the most detailed molecular map of its structure that will help in the development of new #skincare products and treatments @UoNresearch @PNASNews tinyurl.com/3m2s84jr
Image from Uni of Nottingham Press Office (@UoNPressOffice)
Latest work is out - using molecular formula prediction and structural measures to filter molecular 3D OrbiSIMS data. Can be used to ID proteins, lipids and any other molecule class of choice in complex samples @anna_kotowska @SuperFishiAl pubs.acs.org/doi/10.1021/acs…
Molecular Formula Prediction for Chemical Filtering of 3D OrbiSIMS Datasets

Molecular Formula Prediction for Chemical Filtering of 3D OrbiSIMS Datasets

Abstract. Modern mass spectrometry techniques produce a wealth of spectral data, and although this is an advantage in terms of the richness of the informat

pubs.acs.org
3
8
Gus retweeted
NPL (@NPL) profile picture
NPL@NPL11 Mar 2022
Our #OrbiSIMS instrument provides unprecedented speed and high-performance mass spectrometry. We've published the 1st in a series of metrology studies on OrbiSIMS - part of the "Surface & Interface Analysis" journal in tribute to Dr Martin Seah MBE. bit.ly/3CsJFMi
OrbiSIMS metrology Part I: Optimisation of the target potential and collision cell pressure

OrbiSIMS metrology Part I: Optimisation of the target potential and collision cell pressure

In 2017, we introduced the OrbiSIMS instrument that features a dual analyser configuration with a time-of-flight (ToF) mass spectrometer (MS) and an Orbitrap MS, which confer advantages of speed and...

analyticalsciencejournals.onlinelibrary.wiley.com
4
6
Check out our @researchsquare pre-print of a collaborative work between @NPL and @Samsung where we used the #OrbiSIMS to spatially identify degradation products in blue OLEDs. researchsquare.com/article/r…

Direct identification of interfacial degradation in blue phosphorescent OLEDs using nanoscale...

Understanding the degradation mechanism of organic light-emitting diodes (OLED) is essential to improve device performance and stability. OLED failure, if not process-related, arises mostly from...

researchsquare.com
1
1
Our first paper on a series of metrology studies on the #OrbiSIMS is now out! This will be part of SIA's special issue tribute to Dr Martin Seah MBE. I'm very honoured to have contributed. @NPL #orbitrap #massspectrometry #science #metrology analyticalsciencejournals.on…
1
1
1
Very happy to see this published online. A straightforward solution for reducing PDMS contamination in surface analysis when mounting particulate samples! Great work by all @ScienTwins @ValeCCru @PuttyKnees @SuperFishiAl analyticalsciencejournals.on…
1
6
1
18
So exited to see this work published! -library of photocurable biodegradable materials -microstructure control -drug release control -High throughput screening of inks Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers pubs.acs.org/doi/10.1021/acs…
Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers

Abstract. Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation

pubs.acs.org
6
4
1
35
Another brilliant front cover by @heyinfeng – at Beeston, England
Yinfeng (@heyinfeng) profile pictureYinfeng@heyinfeng4 Aug 2021
Really excited to see this work is selected as the cover picture of Advanced Science~! Thanks to all the co-authors especially the guidance of @PuttyKnees @SuperFishiAl. @UoNCfAM @UoNEngineering @UoN_Pharmacy onlinelibrary.wiley.com/doi/…
Are you curious about what 3D printed pill will bring us? Please join the Summer Science event, check our lightning lecture, video and game #3Dprinting #summerScience – at Nottingham, England
This Post is from an account that no longer exists. Learn more
4
11
Lovely to see our paper published. Such a great collaborative work combining modelling and experiments @UoNCfAM @UoNnmRC – at Beeston, England
This Post is from an account that no longer exists. Learn more
1
3
5
Using a new #3D printing process, @UniofNottingham researchers have discovered how to tailor-make artificial body parts, while cutting the risk of bacterial infection at the same time Read more: ow.ly/e3QB50F8bIz #WeAreUoN @PuttyKnees @UoNCfAM @UoNEngineering #UoNResearch
Image from Uni of Nottingham Press Office (@UoNPressOffice)
1
3
Load more