Mi niño @Sharpy_Nb cada vez que tiene un segundo de estar solo en el mapa y le saltan 4 de la nada:
irisparadox retweeted
The 8192 core CPU (@uscompco) is coming along well. I've been doing some major changes the past few weeks.
This is a core layout from yesterday. The core got a lot bigger with the redesigns (mostly some naive approaches to patching gaps and bugs). Some new OpenROAD jobs running tonight with a projected 20% logic reduction. This area plot also has some obvious low density spots and is very disorganized, that should get better too. Routing should be better than the old core though, much less wiring.
Raw performance should be a lot higher with the redesign though, as well as fixing a lot of interconnect deadlock bugs. At peak the current design can issue 15 instructions per cycle per core, not counting SIMD! (Yes, we do have cases where the (magic-mininal) compiler actually makes use of all this! Most of the time it's around 3-6, but that would be impressive sustained for an out of order CPU and this is in-order!) Inner loops and math workloads tend to be on the higher end. This is also done in a way (using some inspiration from 1940s/50s wisdom) where we can pay only a very tiny fraction of the regfile/crossbar logic cost you'd usually need to pull that off.
Nonzero chance markets make upcoming fundraising a bit tougher, but we're still aiming for tapeout next year!
irisparadox retweeted
512 address RAM blocked into cache lines of 32. Here we see a flurry of activity kicked off by a cache miss.
irisparadox retweeted
Neat, you can just have the LLM build a regfile compiler to get much higher logic density.
irisparadox retweeted
ICsprout 55nm Open Source PDK now has initial LibreLane support. SPM went from RTL to GDS in one command: 617 standard cells, die area 2996.9 μm², utilization 100%. KLayout DRC passed. Magic DRC, Netgen LVS, and Magic PEX still fail, with hold violations at the TT corner.
Haven't posted anything in a while. So here we go: I'm working on a small research thesis about XiangShan CPU. My work mostly revolves around the memory subsystem, including the cache coherence and the NoC/Interconnect of the Kunminghu V3. Crazy CPU, I'm in love with it.
1
46
Right now what I'm doing is reading the docs, specifically the Load/Store Unit. The Load Pipeline is crazy: instruction replay and requeue on misalign/RAW, absolutely love it. They even have way predictors for low latency cache access which is even crazier. Oh boy.
1
48
irisparadox retweeted
the Linux kernel wraps almost every multi-line macro in do { } while (0)
it looks like a loop
it never actually loops
the pattern makes multiple statements behave like a single statement so macros work correctly inside if blocks and other control flow
that's why you'll find it throughout the kernel source
irisparadox retweeted
I've been working on my KiCad autorouter, and these are single layers of copper.
irisparadox retweeted
A new video on computer architecture from @CoreDumpped
youtu.be/eNtADpJ2EC4
System Design and First Principles are not from a parallel universe; they should not live in isolation.
- Computer architecture provides the "missing taste"
- Critical "hot paths" get identified early in the game
- Performance engineering is never an afterthought
- The show-and-tell of performance is always measure-first
irisparadox retweeted
When I post plots of the CPU I'm working on, people are surprised at how organic it looks.
If you look through @arenamag's Silicon book, especially at chips from the past 10-15 years, most also look very organic.
The organic-looking parts are logic.
The grids are memory.
irisparadox retweeted
As an Embedded System Engineer,
Please learn:
• C & Modern C++ or Rust
• Data Structures & Algorithms
• Computer Architecture
• Digital Logic & Boolean Algebra
• Microcontrollers (STM32, ESP32, AVR, RP2040)
• ARM Cortex-M/A & RISC-V
• Embedded Linux
• Linux Kernel & Device Drivers
• RTOS (FreeRTOS, Zephyr)
• Bootloaders (U-Boot)
• Build Systems (CMake, Yocto, Buildroot)
• Memory-Mapped I/O
• Interrupts, DMA & Timers
• UART, SPI, I²C, CAN, USB & Ethernet
• TCP/IP, BLE, Wi-Fi & MQTT
• Sensors & Actuators
• ADC, DAC & PWM
• Power Management & Low-Power Design
• Firmware Architecture
• Linker Scripts & Memory Layout
• Debugging (GDB, JTAG, SWD)
• Oscilloscopes, Logic Analyzers & Multimeters
• PCB Basics & Hardware Bring-up
• FPGA Fundamentals & HLS
• Embedded AI & TinyML
• CUDA & Edge AI (for embedded AI systems)
• Python & Bash for Automation
• Git, CI/CD & Testing
• Secure Boot & Firmware Security
• Functional Safety Basics (IEC 61508, ISO 26262)
• Robotics & ROS 2 (optional but valuable)
irisparadox retweeted
I am pretty impressed what open source EDA tool can achieve already. This is an programmable instrumentation amplifier. And yes. Its design and the IHP PDK used is open source :-)
Technically, not in all instances. In any GNU/Linux system, malloc usually uses brk/sbrk for small allocations (so heap), but for bigger allocations it calls mmap, which is not actually the heap as we know it. Besides, brk/sbrk is deprecated and not recommended by POSIX.
37
irisparadox retweeted
Learning computer architecture by building a full GPU from scratch.
▪️ 16-bit ISA & assembler
▪️ High-level programming language (J++) & compiler
▪️ Branch divergence & warp scheduling
▪️ 2 compute cores
Running AI model inference at 81 MHz on a 30$ FPGA
🧵














































