Teslmania retweeted
BREAKING: Giga Press foundations spotted at Tesla Optimus factory in Austing, Texas ๐บ๐ธ
What Tesla is looking to achieve is extremely audacious
While Tesla has typically used 6,000-9,000 ton machines to make the large "Gigacastings" of the Model Y, Cybertruck and Cybercab, this time is totally different.
Now they want to make tens of optimus parts at the same time on a giant >6,000 ton machine instead of using several smaller ones.
Let me explain;
On smaller machines with clamping forces of 400 to 1,500 tons, you can use molds with 2, 4 or 6 cavities to make more parts at the same time.
This is a standard procedure for the die casting industry and the process is very manageable.
On a 6,000 ton machine running a die with dozens of cavities for Optimus parts, the complexity grows almost exponentially.
The first issue is balancing the molten metal flow which has to reach every cavity as evenly as possible.
The first issue. Cavities close to the injection point fill first, receive pressure spikes and form flash, while those farther away receive too little intensification pressure and are more prone to shrinkage porosity and cold shuts.
With two to four cavities this can be balanced well; with 20 to 40 or more, keeping it stable over thousands of shots becomes a very difficult fluid dynamics problem.
The second is the thermal management of the die. A die for a 6,000 ton press can weigh 50 to 100 tons or more, and keeping temperatures and cooling cycles uniform across every cavity is extremely difficult.
Thermal gradients make the die expand unevenly, which distorts it, breaks the seal at the parting line and creates dimensional differences from one cavity to the next.
Such a die needs dozens of independent temperature control units, the devices that heat or cool each circuit of the tool, and even small imbalances are amplified on parts that need tight tolerances, such as the joint and actuator housings and the light structural elements of Optimus.
That is why it is up to Tesla's engineers to design parts that do not need very strict tolerances as cast, so they can be produced with low scrap rates and then machined only where precision is needed, in as few steps as possible to keep the process lean.
Building the die from several modules with replaceable inserts helps with quality, scrap and cost.
Worn or damaged areas can be replaced without scrapping the whole die, critical features can be made as separate inserts that are easier to maintain and sometimes easier to control thermally, and design changes or process corrections can be limited to single inserts instead of the whole tool.
Compared with a one piece die, downtime and long-term tooling costs fall.
Modularity does not remove the core process risks, though: thermal gradients and flow balance affect the whole system, not just individual inserts, and cycle time does not scale in a straight line, because with such a large shot, cooling and extraction can take longer.
The goal is to produce many structural parts or housings in a single shot, reducing part count and cost at the very high volumes needed for millions of robots.
Many humanoid robot startups say their components need higher precision than automotive parts. Boston Dynamics even commented: "We machine our parts in house because we have such tight tolerances that nobody can make these parts".
But Tesla is no beginner. To reach a $25,000 robot it needs cheap parts, made to tight tolerances with few processes, following the idea of making one product in one process, once.
One example is "painted" body panels that come straight out of the reaction injection moulding machine, a process in which two liquid components react inside the mould, with no need for an expensive paint shop.
Optimus will use reaction injection moulding as well btw.
At the Giga Texas Optimus factory SE side, the four reinforced foundations are getting the IDRA GIga Press frame mounts installed into the rebar ahead of pouring the concrete.
This is exactly the same as what we saw with all the casting machines installed in the Casting section of the main Giga Texas factory & something Iโve been waiting to show.
Pretty much confirms what Iโve been hearing & I will stay on the lookout for the IDRA press parts deliveries when they arrive on site. @lucagrecoita
Teslmania retweeted
์ดํ๋ฆฌ์, ํ
์ฌ๋ผ FSD ์น์ธ (12๋ฒ์งธ)
์ฌ๋ํด์. ์ดํ๋ฆฌ์!!!
- 4/10 ๋ค๋๋๋
- 5/20 ๋ฆฌํฌ์๋์
- 5/29 ์์คํ ๋์
- 6/9 ๋ด๋งํฌ
- 6/10 ๋ฒจ๊ธฐ์
- 9/8 ์ฌ๋ก๋ฒ ๋์
- 9/21 ์ฒด์ฝ
- 9/29 ํฌ๋ก์ํฐ์
- 10/16 ์ฌ๋ก๋ฐํค์
- 10/26 ๋ผํธ๋น์
- 11/11 ํ๋๋
- 11/20 ์ดํ๋ฆฌ์
Teslmania retweeted
Secret project revealed: portal axles for the Cybertruck!
The Cybertruck is already a formidable beast. So why does the one on the left suddenly look miniature? Itโs parked next to our portal axle prototype.
Two years ago we took on the daunting task of developing portal axles for the Cybertruck. After extensive testing, on-road and off, development continues to advance towards production.
Portal axles support our defense programs when paired with our upcoming SWAT armor: quiet, low heat signature, nimble, armored, and able to carry vehicle to grid power off-road. Rechargeable from the sun (solar/battery), no gas dependency.
Oh, and yes it also happens to make for an epic personal driving experience! Coming in 2027.
Teslmania retweeted
๊ธฐ๋ถ๊ธ ์์์ฆ ๋์ฐฉํ์ต๋๋ค
๋ง์๋๋ฆฐ ๋๋ก (์ฌ)๊ตํต์ฌ๊ณ ํผํด์์ง์ ํฌ๋ง๋ด์ฌ๋จ์์ ๋ณด๋ด์ฃผ์ ์์์ฆ์ ํจ๊ป ์ฌ๋ฆฝ๋๋ค
5๋ง ๋ช
์ ๋ง์์ด ๋ชจ์ฌ ๋ง๋ 500๋ง ์
๊ตํต์ฌ๊ณ ํผํด๊ฐ์ ์์ด๋ค์๊ฒ ์ ์ ํด์ง๊ธธ ๋ฐ๋๋๋ค
๋ค์ ํ๋ฒ ํจ๊ปํด์ฃผ์ ๋ชจ๋ ๋ถ๊ป ๊ฐ์ฌ๋๋ฆฝ๋๋ค. โค๏ธ
์ฝ์๋๋ ธ๋ 500๋ง ์, ๊ธฐ๋ถํ์ต๋๋ค
์ด์ ์คํ 4์์ฏค ๋์ ์๊ฐ 5๋ง ๋ช
์ ๊ฑฐ์ ๋ฟ์์ ๋ "์ด์ ๋๋ค" ์ถ์์ต๋๋ค
๊ทธ ์ค๋ ์ ์ฐธ์ง ๋ชปํ๊ณ ํ๋ฃจ ๋จผ์ ์
๊ธํ์ต๋๋ค. ๐
๋์ํด์ฃผ์ 5๋ง ๋ช
์ ์ด๋ฆ์ผ๋ก
(์ฌ)๊ตํต์ฌ๊ณ ํผํด์์ง์ ํฌ๋ง๋ด์ฌ๋จ์ 500๋ง ์์ ๋ณด๋๊ณ ,
๊ตํต์ฌ๊ณ ํผํด๊ฐ์ ์์ด๋ค์ ๋๋ ๋ฐ ์ฐ์
๋๋ค.
์๋๋ ๊ธฐ๋ถ๊ธ ์์์ฆ๊ณผ ํจ๊ป ์ฌ๋ฆฌ๋ ค๊ณ ํ๋๋ฐ,
์์ง ๋จ์ฒด์์ ์์์ฆ ๋ฐ๊ธ์ด ์งํ ์ค์ด๋ผ
์ด์ฒด ๋ด์ญ์ผ๋ก ๋จผ์ ์์ ์ ํฉ๋๋ค
์์์ฆ์ด ๋์ฐฉํ๋ฉด ์ด ๊ธ์ ๋ฐ๋ก ์ถ๊ฐ๋ก ์ฌ๋ฆฌ๊ฒ ์ต๋๋ค
์์จ์ฃผํ์ผ๋ก ์ฌ๊ณ ๊ฐ ์ค์ด๋๋ ๋ ์ ๊ฟ๊พธ๋ ์ฐ๋ฆฌ์ ๋ง์์ด
๋๊ตฐ๊ฐ์๊ฒ ๋ฐ๋ปํ ํ์ด ๋์์ผ๋ฉด ์ข๊ฒ ์ต๋๋ค
์ด ๊ธฐ๋ถ๋ ์ ํผ์ ํ ๊ฒ ์๋๋ผ
๋์ ๋ฒํผ์ ๋๋ฌ์ฃผ์ ์ฌ๋ฌ๋ถ ๋ชจ๋๊ฐ ํจ๊ปํ ๊ฒ์
๋๋ค.
์ ๋ง ๊ฐ์ฌํฉ๋๋ค. โค๏ธ
โํด์ธ์ฃผ์์ ์กฐ์ง์ฌํธ(ํฉ๋ณยท์ฃผ์๊ตํ ๋ฑ)์ ๋ํ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ ๋ ๋์
โ ์ฒญ์์ด 11์ 19์ผ ๊ตญํ์ ์ ์ ์ ์๋์ต๋๋ค.
์ฐธ์ฌํ์ ๋ชจ๋ ๋ถ๋ค์ ๋
ธ๋ ฅ์ ๊ฒฐ๊ณผ์
๋๋ค.
[ ์ดํ์ ๊ณผ์ ]
์ ์ > ์์ํ ์ฌ์ฌ > ๋ณธํ์ ์ฌ์ > ์ ๋ถ์ด์ก > ์ฒ๋ฆฌํต์ง
Teslmania retweeted
๊ตญ๋ฏผ์ฒญ์ 5๋ง ๋ช
๋ฌ์ฑํ์ต๋๋ค
์ฐ๋ฆฌ๊ฐ ํจ๊ป ์ ์์ ์ฌ๋์ต๋๋ค
ํด์ธ์ฃผ์ ํฉ๋ณ ์ ์๋์ธ ๊ณผ์ธ์ด์ฐ
์ฐ์ ํ๋ค๊ฒ ์ค๋ฅผ์๋ก ์ ์์์ ๋ณด๋ ํ๊ฒฝ์ด ๋ ์๋ฆ๋ต๊ณ ,
์ ์์์ ๋จน๋ ์ปต๋ผ๋ฉด ํ๋๋ ์ธ์์์ ์ ์ผ ๋ง์์ต๋๋ค
์ง๋ ํ ๋ฌ์ด ๋ฑ ๊ทธ๋ฌ์ต๋๋ค
์ซ์๊ฐ ์ข์ฒ๋ผ ์ค๋ฅด์ง ์์ ๋ง๋งํ๋ ๋ ๋ ์์๊ณ ,
"์ ๋ง ๋ ๊น?" ์ถ์๋ ์๊ฐ๋ ๋ง์์ต๋๋ค
๊ทธ๋ฐ๋ฐ ์ค๋, 5๋ง ๋ช
์ด๋ผ๋ ์ ์์ ์ฐ์ต๋๋ค
์์ง๋ ๋ฏฟ๊ธฐ์ง ์๊ณ , ๊ฐ๋๊ณผ ์ ์จ์ด ๊ฐ์์ง ์์ต๋๋ค
@ssingletasker ์ฝ๋์ ๊ตญ๋ฏผ์ฒญ์ ๊ธ์ ์์์ผ๋ก
๋งค์ผ ๋ฐค๋ฆ๊ฒ๊น์ง ๋งํฌ๋ฅผ ๋๋ ์ฃผ์ ๋ถ,
๊ฐ์กฑ๊ณผ ์น๊ตฌ์๊ฒ ํ ๋ช
ํ ๋ช
๋ถํํด์ฃผ์ ๋ถ,
์กฐ์ฉํ ๋์ ๋ฒํผ์ ๋๋ฌ์ฃผ์ ๋ถ.
์ด ์ ์์ ํ
์ฌ๋ผ ํฌ์์ ์ฌ๋ฌ๋ถ ํ ๋ถ ํ ๋ถ์ด ํจ๊ป ๋ง๋ ๊ธธ์
๋๋ค
์ ๋ง ๊ณ ๋ง์ต๋๋ค. ๐
์ค๋๋งํผ์ ์ ์์์ ์ปต๋ผ๋ฉด ํ ๊ทธ๋ฆ ํ๋ฏ ์ด ๊ธฐ์จ์ ๋ง์๊ป ๋๋ ธ์ผ๋ฉด ์ข๊ฒ ์ต๋๋ค
๊ทธ๋ฆฌ๊ณ ๋ด์ผ๋ถํฐ๋ ๋ค์ ํจ๊ป
๊ตญํ ์ฌ์ฌ๋ผ๋ ๋ค์ ๋ด์ฐ๋ฆฌ๊ฐ ๋จ์ ์์ต๋๋ค
์ ๋๊ฐ ๋ฐ๋๋ ๊ทธ๋ ๊น์ง, ๋๊น์ง ํจ๊ปํด์ฃผ์ธ์
์ฒ์๋ถํฐ ๋ง์ง๋ง๊น์ง ํ๋ํด ์ฃผ์ ๋ชจ๋ ๋ถ๋ค ๋ค์ํ๋ฒ ๊ณ ๋ง์ต๋๋ค ๐
5๋ง ๋ช
๋ฌ์ฑ ์ 500๋ง ์ ๊ธฐ๋ถํฉ๋๋ค!
๊ณผ์ธ์ด์ฐ ๊ตญ๋ฏผ๋์์ฒญ์, ํ์ฌ 41,919๋ช
!
5๋ง ๋ช
๊น์ง ๋จ์ ์ธ์์ ์ฝ 8,000 ๋ช
์
๋๋ค.
11์ 21์ผ ๋ง๊ฐ๊น์ง ํ๋ฃจ 1,600๋ช
์ด๋ฉด ์ถฉ๋ถํ ๋ฟ์ ์ ์์ด์. ์ง๋ 3์ผ ๋์ ์ฐ๋ฆฌ๊ฐ ํ๋ฃจ ํ๊ท 2,000๋ช
์ฉ ๋๋ ค์์ผ๋๊น์ ๐ช
5๋ง ๋ช
์ ๋ฌ์ฑํ๋ฉด ์ ๊ฐ 500๋ง ์์ ๊ตํต์ฌ๊ณ ํผํด์์ง์ ํฌ๋ง๋ด์ฌ๋จ์ ๊ธฐ๋ถํฉ๋๋ค.
๋์ ํ ๋ถ ํ ๋ถ์ด 100์์ฉ ๋ชจ์ ๋ง๋๋ ๊ธฐ๋ถ์์.
ํ
์ฌ๋ผ ์ค๋๋ก์ ๊ตญ๋ด์ FSD๊ฐ ๋์
๋์ด ๊ตํต์ฌ๊ณ ๊ฐ ์ค์ด๋๋ ๋ ์ ๊ฟ๊ฟ๋๋ค.
๊ทธ๋ ์ด ์ค๊ธฐ ์ ๊น์ง, ์ด๋ฏธ ์ฌ๊ณ ๋ก ์ํ์ ๊ฒช์ ๊ฐ์ ๊ณผ ์์ด๋ค์๊ฒ ํ์ด ๋๊ณ ์ถ์ต๋๋ค.
๐ ํจ๊ปํด์ฃผ์๋ ๋ถ๋ค๊ป ๊ฐ์ฌ ์ ๋ฌผ: ์คํ์ด์คX ๋ฆฝ๋ฐค ํค๋ง ์ด 150๋ช
โ ์ฒญ์ ๋์ ์ธ์ฆ (์ ์ฐฉ์ 100๋ช
)
์ฒญ์ ๋์๋ฅผ ์๋ฃํ ๋ค ์บก์ฒ๋ฅผ ๋๊ธ๋ก ์ธ์ฆํด์ฃผ์ธ์.
โก ๋ณด๋์ค ์ฌ๊ฒ์ยท์ธ์ฉ (์ถ์ฒจ 50๋ช
)
๋์ ์ธ์ฆ ๋๊ธ์ ๋ชป ๋ค์
๋ ๊ด์ฐฎ์์!
์ด ๊ธ์ ์ฌ๊ฒ์ ๋๋ ์ธ์ฉํด์ฃผ์ ๋ถ๋ค ์ค ์ถ์ฒจ์ผ๋ก 50๋ถ๊ป ๋๋ฆฝ๋๋ค.
๐ ์ฐธ์ฌ ๊ธฐ๊ฐ: 11์ 16์ผ(์) ~ 11์ 21์ผ(ํ ) ์์ ๊น์ง
๊ธฐ๋ถ๋ ์ ๊ฐ ํ๊ฒ ์ต๋๋ค.
์ฌ๋ฌ๋ถ์ ์ฌ๊ฒ์ ํ ๋ฒ์ผ๋ก ํจ๊ปํด์ฃผ์ธ์ ๐
์ฐ๋ฆฌ๊ฐ ํ์ ํฉ์น๋ฉด 5๋ง ๋ช
, ๋ฐ๋์ ๊ฐ๋๋ค!
๐ ๊ตญ๋ฏผ์ฒญ์ ๋ฐ๋ก๊ฐ๊ธฐ
is.gd/SLnZxV
๐งฎ ํด์ธ์ฃผ์ ์๋์ธ ๊ณ์ฐ๊ธฐ ๋ฐ๋ก๊ฐ๊ธฐ
teslatax.netlify.app/
ํด์ธ์ฃผ์์ ์กฐ์ง์ฌํธ(ํฉ๋ณยท์ฃผ์๊ตํ ๋ฑ)์ ๋ํ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ ๋ ๋์
์ ๊ดํ ์ฒญ์
ํ
์ฌ๋ผ๋ฅผ ๋น๋กฏํด ๋งค๋๋ ํ์ง ์์๋๋ฐ ๋จ์ํ ๊ธฐ์
์ด ํฉ๋ณํ๋ค๋ ์ด์ ๋ก ์๋์๋์ธ๋ฅผ ๋ด๋ ๊ฒ์ด ๋ง์ด ๋๋์?! ๐ฎโ๐จ
์ด๊ฒ์ ๋ง๊ธฐ ์ํด ๋ง์ ๋ถ๋ค์ด ๋์ฐธํด์ฃผ์
์ ๋๋์ด 99% ๋ฅผ ๋์ด์ฐ์ต๋๋ค.
๋ถ๊ฐ๋ฅ์ด ๊ฐ๋ฅ์ผ๋ก ๋ณํ๋ค์!!!
์ด ์๋ฆฌ๋ฅผ ํตํด ์์์ ์ด๋์ด์ฃผ์๋ ๋ถ๋ค๊ณผ ํจ๊ป ๋์ฐธํด ์ฃผ์ ๋ถ๋ค ๋ฆฌ์คํํฉ๋๋ค!
๊ตญ๋ฏผ์ฒญ์ ๋ฐ๋ก๊ฐ๊ธฐ
is.gd/SLnZxV
Teslmania retweeted
โก๏ธ๊ตญ๋ฏผ์ฒญ์ ํต๊ณผ๊น์ง (D-3, 21:04) 299๋ช
๋จ์์์!!
โก๏ธ5๋ง ๋์ ๋๋ฌ ์์ ๋ฐค 11์ 25๋ถ ~ 11์ 40๋ถ ์ฌ์ด ๐ค
๐จํด์ธ์ฃผ์ ๊ณผ์ธ์ด์ฐ ์ฒญ์ ๐ is.gd/SLnZxV
๐ ๊ตญ๋ฏผ๋์ 5๋ง ์ด๋ฒคํธ: ๐ buly.kr/884K3U9
Teslmania retweeted
49350 / 50000 99% ๋ํ ๐ช
650 ๋ช
๋จ์์ต๋๋ค
๐ปํด์ธ์ฃผ์ ์๋์ธ ๊ณ์ฐ๊ธฐ ๋ฐ๋ก๊ฐ๊ธฐ
teslatax.netlify.app
๐ป๊ตญ๋ฏผ์ฒญ์ ๋ฐ๋ก๊ฐ๊ธฐ
is.gd/SLnZxV
๊ตญํ์ ์์ฒญ์ > ๊ตญ๋ฏผ๋์ ์ฒญ์ > ํด์ธ์ฃผ์์ ์กฐ์ง์ฌํธ(ํฉ๋ณยท์ฃผ์๊ตํ ๋ฑ)์ ๋ํ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ ๋ ๋์
์ ๊ดํ ์ฒญ์
48,537/50,000 petitions.assembly.go.kr/proโฆ
1
8
Teslmania retweeted
ํด์ธ์ฃผ์ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ฒญ์ ์์ง ํ์ง ์์ผ์ ๋ถ ๋์ ๋ถํ๋๋ฆฝ๋๋ค.๐
$TSLA $SPCX
๋จ 4%...!!
์ฃผ๋ณ ์ง์ธ 1๋ช
์ฉ๋ง ์ค๋ํด์ฃผ์ญ์ผ!
ํ์ฌ ๋์์ 48,042๋ช
, 96%
๋งํฌ : is.gd/SLnZxV
Teslmania retweeted
ํด์ธ์ฃผ์ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ฒญ์ ์์ง ํ์ง ์์ผ์ ๋ถ ๋์ ๋ถํ๋๋ฆฝ๋๋ค.
์ค๋ ๋ง๋ฌด๋ฆฌ ๋ ๊ฒ ๊ฐ๋ค์!
ํ์ฌ ๋์์ 48,042๋ช
, 96%
๋งํฌ : is.gd/SLnZxV
ํด์ธ์ฃผ์ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ฒญ์ ์์ง ํ์ง ์์ผ์ ๋ถ ๋์ ๋ถํ๋๋ฆฝ๋๋ค.
๋ฌ์ฑ ๊ฐ๋ฅํ ๊ฒ ๊ฐ๋ค์!
ํ์ฌ ๋์์ 45,662๋ช
, 91%!!
๋งํฌ : is.gd/SLnZxV
Teslmania retweeted
์ฒญ์ ์๋๊ฐ ๋จ์ด์ง๊ณ ์์ด์. ๐
๐ ๊ณ์ ๋ค์ ๋๋์ ์ง์์ฌ๊ฒฉ ํ๋ฒ์ด๋ฉด
์ค๋ ๋๋ผ ์ ์์ด์! 2,100๋ช
!!๐ฅ๐ฅ
๐จํด์ธ์ฃผ์ ๊ณผ์ธ์ด์ฐ ์ฒญ์ ๐ is.gd/SLnZxV
๐ ๊ตญ๋ฏผ๋์ 5๋ง ์ด๋ฒคํธ: ๐ buly.kr/884K3U9
Teslmania retweeted
์ฒญ์ ํํฉ์
๋๋ค (11์ 17์ผ 20:00 ๊ธฐ์ค).
โข ๋์ 47,235๋ช
/ ๋ชฉํ 50,000๋ช
(94%)
โข 11/17 11:58 ๋๋น +1,368๋ช
(์ง์ ํ์ฐจ 45,867๋ช
๊ธฐ์ค)
โข ๋จ์ 2,765๋ช
ยท 5์ผ(์ค๋ ํฌํจ), ํ๋ฃจ ํ์ ์ฝ 553๋ช
๊ตญ๋ด ๋ฒ์ธ ํฉ๋ณ์ ์๊ฑด์ ๊ฐ์ถ๋ฉด ๊ณผ์ธ์ด์ฐ, ํด์ธ ์ฃผ์ ํฉ๋ณยท์ฃผ์๊ตํ์ ๊ทธ ์์ ์ ์๋๋ก ๋ณด์ ์๋์ธ๊ฐ ๊ณผ์ธ๋ ์ ์์. ํ
์ฌ๋ผ ํฉ๋ณ์ด ์ด๋ค์ง๋ฉด, ๊ตญ๋ด ์ฆ๊ถ์ฌ๋ฅผ ํตํด TSLA์ ํฌ์ํ ๋ชจ๋ ์ฌ๋์๊ฒ ํด๋น๋ ์ ์์.
์ฒญ์: petitions.assembly.go.kr/proโฆ
#ํด์ธ์ฃผ์ #์๋์ธ #๊ณผ์ธ์ด์ฐ #๊ตญ๋ฏผ๋์์ฒญ์
ํด์ธ์ฃผ์์ ์กฐ์ง์ฌํธ(ํฉ๋ณยท์ฃผ์๊ตํ ๋ฑ)์ ๋ํ ์๋์๋์ธ ๊ณผ์ธ์ด์ฐ ์ ๋ ๋์
์ ๊ดํ ์ฒญ์
ํ
์ฌ๋ผ๋ฅผ ๋น๋กฏํด ๋งค๋๋ ํ์ง ์์๋๋ฐ ๋จ์ํ ๊ธฐ์
์ด ํฉ๋ณํ๋ค๋ ์ด์ ๋ก ์๋์๋์ธ๋ฅผ ๋ด๋ ๊ฒ์ด ๋ง์ด ๋๋์?! ๐ฎโ๐จ
์ด๊ฒ์ ๋ง๊ธฐ ์ํด ๋ง์ ๋ถ๋ค์ด ๋์ฐธํด์ฃผ์
์ ๋๋์ด 94% ๋ฅผ ๋์ด์ฐ์ต๋๋ค. ๊ฐ๋ฅํ๊ฒ ๋ค์!!
ํน์ ์์ง๋ ์ํ์ ๋ถ ๊ณ์๋ฉด ๋์ฐธํด์ฃผ์ธ์!!
๊ทธ๋ฆฌ๊ณ ์ด ์๋ฆฌ๋ฅผ ํตํด ์์์ ์ด๋์ด์ฃผ์๋ ๋ถ๋ค๊ณผ ํจ๊ป ๋์ฐธํด ์ฃผ์ ๋ถ๋ค ๋ฆฌ์คํํฉ๋๋ค!
๊ตญ๋ฏผ์ฒญ์ ๋ฐ๋ก๊ฐ๊ธฐ
is.gd/SLnZxV
Teslmania retweeted
46816 / 50000 94% ๋ํ ๐ช
3184 ๋ช
๋จ์์ต๋๋ค
๐ปํด์ธ์ฃผ์ ์๋์ธ ๊ณ์ฐ๊ธฐ ๋ฐ๋ก๊ฐ๊ธฐ
teslatax.netlify.app
๐ป๊ตญ๋ฏผ์ฒญ์ ๋ฐ๋ก๊ฐ๊ธฐ
is.gd/SLnZxV
Teslmania retweeted
์ค๋๋ ๊ฐ๋ด
์๋ค.
์ฒญ์ 5๋ง๋ช
์ผ๋ง ์๋จ์์ด์.
4800๋ช
์ ๋ ๋จ์๋ค์.
์ค๋ 5๋ง ๋์ด๋ฒ๋ฆผ ์ข๊ฒ ์ด์๐๐
LFG ๐๐๐๐ฅ๐ฅ
์ฒญ์์ฌ์ดํธ:
petitions.assembly.go.kr/proโฆ
์ด์ 6700 ๋ช
๋จ์์ด์.
๋ ๊ฒ ๊ฐ์์. ์ด์ ๋
์กฐ๊ธ๋ง ๋ํ๋ฉด ๋ฉ๋๋ค.
petitions.assembly.go.kr/proโฆ













































