The Powercore V3 is out of pre-order! All new orders should ship in 2-4 weeks. The Powercore V3 is our most capable spark generator yet. Passively cooled and extremely fault resistant to those just learning EDM or running open loop systems. Grab yours today with this link! 👇

IP68 waterproof inductive sensors. These are really neat little components! I circuit board directly soldered to wires is placed in a small ABS(?) box and coated in a rigid, opaque epoxy. This is probably the best way of waterproofing electronics for long term submersion

perfect

Cooper has been working hard. Parts are arriving. Work is being done. To be clear, this is Cooper typing this and I'm back at work at 9:30 again to keep working. Doing our best to take care of everyone

Rack Pro-2 seen in the wild! Small self note here, we need to do a better job with the outside finish on the sealant. Some comes out during application and curing. We should run an external bead for aesthetics

Site and email down due to DNS error. Working on fixing this.

We and our customers have found success with distilled water and filtration. We are able to add deionization for an additional fee.

HAHAHAAHAHAHAHAHAHA

Easier link access: rackrobo.io/pages/pro-2

Finally, Western companies and schools can access wire EDM in an affordable, secure, and easy to work with form factor. The Rack Pro-2 is available now, starting at only $15,000. Stock configuration, or with your customizations. Spec sheet and purchase link available at rackrobo.io/pages/pro-2. Please email for customization requests.

We made the Rack Pro-2 to fill that niche. Low power consumption (under 1500W), low cost (only $15K), and secure to work with (open firmware)

We realized that wire EDM was still either budget kits put together on non-standard hardware, or $100,000+ machines Many companies need to make thousands of precise parts for firearms, gear trains, and electric motors. Buying a fleet of legacy Western WEDM machines was untenable

Assembling kits and running on belt driven hardware was not enough for many of our business customers. They wanted something with precision, stability, and filtration right out of the box. INTRODUCING THE RACK PRO-2, an affordable, Western, turnkey WEDM machine.

We've been talking to some metal AM suppliers about options. We might have a solution for them ;)

Common question. No, it is not a useful way to machine PCBs

Cooper is a chill, relaxed guy. Not sure where this came from??

It really works. Anything you want to see cut?

we have too much RESPECT to EVER A/B test our audience

What would you like to see cut with wire EDM? We're thinking gears, knives, pressure locking parts, etc. youtu.be/-WsPPsHX1SU

We have a new video on the Betta Wire up on Youtube! In this video we make a part for the Betta ON the Betta. Check it out here!👇